ALL GIDEON EFS SERIES SYSTEM INCLUDED:
- Enclosed cover protection
- Shuttle Bed
- Large Extruded and machined Gantry.
- FUSCUT 2000C controller
- Auto focus cutting head (head type relative to power source)
- Max Laser Source
- Hiwin Rails; X axis 25mm, Y axis 30mm, Z axis 20mm
- Japan Fuji motors and drivers
Optional:
- High Pressure Air Compressor and Air Dryer system
- Dust Collection System
- Tube Laser Combination system up to 20ft length
- Full Automation Material Loading & Offloading
- Material Handling Jub Crane
- Slat Scale Remover
GIDEON EFS SERIES
The GIDEON EFS SERIES by Cangian is a high-performance laser cutting system designed for fabricators who demand speed, precision, and scalability. Built to handle the challenges of modern sheet metal processing, the GIDEON EFS SERIES delivers exceptional edge quality across a broad range of materials, from thin gauge stainless steel to thick mild steel, copper, and aluminum.
Whether you’re running high-volume production or custom low-batch jobs, the GIDEON EFS SERIES empowers your shop with the cutting-edge capabilities needed to stay competitive.
High-Speed Fiber Laser Cutting
● Cutting power from 6kW to 30kW for unparalleled cutting speed and quality.
● Capable of cutting mild steel up to 1.25", stainless steel up to 1.0", and aluminum up to 1.0" — depending on configuration.
● Precise beam quality ensures minimal burr formation and reduced post-processing.
Smart CNC Control System
● Advanced motion control with a high-resolution graphical interface.
● Optimized for ease of use, fast setup times, and reliable program execution.
● Remote diagnostics and monitoring capabilities for proactive maintenance and support.
Built for Heavy-Duty Operation
● Fully enclosed cutting area with automated shuttle table system for rapid sheet exchange.
● Heavy-duty steel frame ensures structural stability and vibration damping for continuous accuracy.
● Dual linear motors on X and Y axes for fast acceleration and deceleration.
Generous Working Area
● Cutting bed size: 4000 mm x 2000 mm (6’ x 12’) — ideal for full-size sheet processing without repositioning.
● Optional larger formats available for oversized material or nested production.
Automation-Ready Integration
● Compatible with a full suite of automation modules: automatic load/unload, part sorting, and raw material towers.
Energy Efficient by Design
● Lower energy consumption compared to traditional CO₂ lasers.
● High wall-plug efficiency of the fiber source means lower running costs and a smaller environmental footprint.
● Minimal maintenance thanks to a solid-state design — no mirrors, lenses, or laser gas to replace.
Designed for Dynamic Production Environments
Cangian developed the GIDEON EFS SERIES to offer maximum throughput without compromising on cut quality or operational flexibility. Its rigid mechanical design, high-acceleration linear drives, and integrated CNC intelligence ensure outstanding part accuracy — even at top speeds.
Available laser power options (6kW to 30kW) allow the system to be tailored to your production requirements, with enhanced piercing capabilities and unmatched cut consistency, even on reflective or heat-sensitive materials.
Increase Small Part Production and Reduce Downtime with Microjoint Capabilities:
- Stronger hold – Full-thickness tabs keep parts secure in skeleton
- Stable for large/heavy parts – Prevents shifting during long cuts
- Prevents tip-ups – Reduces head crash risk on small/thin parts
- Good for thick plate – Handles >12mm material better than nanojoints
- Works under high gas pressure – Resists part lift from assist gas
- Simple parts OK – Fine for parts where finish isn’t critical
- Manual control – Easy visual check, good for one-offs/protos
Faster Setup. Smarter Workflow. Intuitive Control.
In sheet metal fabrication, downtime between jobs eats into productivity. The GIDEON EFS SERIES solves this with a responsive, user-friendly touchscreen interface that gets you cutting faster and more efficiently.
Thanks to smart automation integration and intuitive menu navigation, switching between cutting programs is quick and seamless — reducing changeover time and keeping your production on track.
Operate your fiber laser and connected automation systems as easily as using a smartphone. Whether loading new material, starting a job, or adjusting cut parameters, the GIDEON EFS SERIES gives you complete control at your fingertips.
Reliability That Keeps You Running
Minimize downtime. Maximize output. The GIDEON EFS Series integrates intelligent systems that reduce maintenance and avoid costly disruptions.
- Smart Collision Prevention for safe unmanned operation with fast and safe positioning
- Controlled Fiber Technology ensures stable thick plate cutting for structural applications (with the proper Power source)
- Condition Guide monitors system health in real-time
- Automated Edge Detection ensures perfect alignment and sheet placement accuracy
- Spend more time cutting and less time stopping.
What Metals Can be Laser Cut?
We profile an extensive range of metal and non-metallic materials. With four different flatbed cutting methods under one roof, we can cut materials at depths between 0.1mm and 270mm. If a particular material is not in our exhaustive inventory, we can typically source it within 24-48 hours.
| GIDEON | 3015EFS | 4015EFS | 6015EFS | 4020EFS | 6020EFS |
|---|---|---|---|---|---|
| CUTTING AREA | 5X10 ft (3000mm X 1500mm) | 5X12 ft (4000mm X 1500mm) | 5X20 ft (6000mm X 1500mm) | 6X12ft (4000mm X 2000mm) | 6X20 ft (6000mm X 2000mm) |
| CUTTING POWER OPTIONS | 6KW - 24KW | 6KW - 24KW | 6KW - 24KW | 6KW - 24KW | 6KW - 24KW |
| MAX POSITIONING SPEED | 120 m/min | 120 m/min | 120 m/min | 120 m/min | 120 m/min |
| ACCELERATION SPEED | 11.76 m/s² | 11.76 m/s² | 11.76 m/s² | 11.76 m/s² | 11.76 m/s² |
| MAXIMUM WORK PIECE WEIGHT | 3000lbs | 3000lbs | 4000lbs | 5000lbs | 6000lbs |
| POSITION ACCURACY | 0.05mm | 0.05mm | 0.05mm | 0.05mm | 0.05mm |
| REPEATABILITY | 0.03mm | 0.03mm | 0.03mm | 0.03mm | 0.03mm |
PFC Channel
| Minimum (mm) | Maximum (mm) |
|---|---|
| 10 x 10mm | 300 x 300mm |
RSA Angle
| Minimum (mm) | Maximum (mm) |
|---|---|
| 10 x 10mm | 254 x 254mm |
Rectangular & Square Tubes
| Minimum (mm) | Maximum (mm) |
|---|---|
| 10 x 10mm | 300 x 300mm |
Round Tube & Pipe
| Minimum (mm) | Maximum (mm) |
|---|---|
| 10mm | 406.4mm |
Universal Beams
| Minimum (mm) | Maximum (mm) |
|---|---|
| 10 x 10mm | 203 x 203mm |
