ALL GIDEON EF SERIES SYSTEM INCLUDED:
- Enclosed cover protection
- Large Extruded and machined Gantry.
- FUSCUT 2000C controller
- Auto focus cutting head (head type relative to power source)
- Max Laser Source
- Hiwin Rails; X axis 25mm, Y axis 30mm, Z axis 20mm
- Japan Fuji motors and drivers
Optional:
- High Pressure Air Compressor and Air Dryer system
- Dust Collection System
- Material Handling Jub Crane
- Slat Scale Remover
GIDEON EF SERIES
The GIDEON EF Series: The Perfect Fit for Growing Fabrication Shops
The GIDEON EF Series CNC Fiber Laser by Cangian is purpose-built for light to medium-sized metal fabrication businesses that need speed, accuracy, and reliability—without the oversized footprint or cost of heavy-duty systems.
Engineered to handle the everyday demands of modern sheet metal processing, the GIDEON EF Series delivers outstanding edge quality on a wide variety of materials, from thin-gauge stainless steel to thicker mild steel, aluminum, and copper.
Whether you specialize in custom low-volume work or steady mid-volume production, this system gives your shop the flexibility to take on more jobs and stay competitive—while maintaining the precision and consistency your customers expect.
High-Speed Fiber Laser Cutting
● Cutting power from 1kW to 6kW for unparalleled cutting speed and quality.
● Capable of cutting mild steel up to .75", stainless steel up to .5", and aluminum up to .4375" — depending on configuration (this reflects 6kW settings)
● Precise beam quality ensures minimal burr formation and reduced post-processing.
Smart CNC Control System
● Advanced motion control with a high-resolution graphical interface.
● Optimized for ease of use, fast setup times, and reliable program execution.
● Remote diagnostics and monitoring capabilities for proactive maintenance and support.
Built for Heavy-Duty Operation
● Fully enclosed cutting area with automated shuttle table system for rapid sheet exchange.
● Heavy-duty steel frame ensures structural stability and vibration damping for continuous accuracy.
● Dual linear motors on X and Y axes for fast acceleration and deceleration.
Generous Working Area
● Oversized Cutting bed sizes: example, 4’ x 3’ (Actual Size 58” X 38”) — ideal for full-size sheet processing without repositioning.
● Optional larger formats available for oversized material or nested production.
Energy Efficient by Design
● Lower energy consumption compared to traditional CO₂ lasers.
● High wall-plug efficiency of the fiber source means lower running costs and a smaller environmental footprint.
● Minimal maintenance thanks to a solid-state design — no mirrors, lenses, or laser gas to replace.
Designed for Growing Fabrication Shops
The GIDEON EF Series is purpose-built for light to medium-sized metal fabrication operations that need speed, accuracy, and flexibility without the oversized footprint or complexity of heavy-duty systems.
- Precision That Scales with Your Business
Its rigid frame, high-acceleration drives, and smart CNC controls deliver exceptional part accuracy—even when cutting at high speeds. Perfect for shops handling a wide variety of jobs without sacrificing quality. - Power Options for Every Workflow
Choose the right fit for your production needs with laser power options from 1kW – 6kW. From thin-gauge sheet to thicker materials, the GIDEON EF Series gives you the versatility to take on more jobs, cut faster, and keep your workflow smooth. - Optimized for Today’s Materials
Whether you’re cutting stainless steel, aluminum, or reflective metals, enhanced piercing technology and intelligent cut controls ensure consistent, clean results—job after job.
Increase Small Part Production and Reduce Downtime with Microjoint Capabilities:
- Stronger hold – Full-thickness tabs keep parts secure in skeleton
- Stable for large/heavy parts – Prevents shifting during long cuts
- Prevents tip-ups – Reduces head crash risk on small/thin parts
- Good for thick plate – Handles >12mm material better than nanojoints
- Works under high gas pressure – Resists part lift from assist gas
- Simple parts OK – Fine for parts where finish isn’t critical
- Manual control – Easy visual check, good for one-offs/protos
Faster Setup. Smarter Workflow. Intuitive Control.
Every second counts in sheet metal fabrication, especially for a small to medium sized fabrication shop, and downtime between jobs costs productivity. The GIDEON EF SERIES eliminates wasted time with an ultra-responsive, user-friendly touchscreen interface that gets you cutting faster than ever.
- Seamless Job Changeovers
Smart automation and intuitive menu navigation make switching programs quick and effortless. No delays. No bottlenecks. Just smooth, continuous production. - Control Made Simple
Operate your fiber laser like a smartphone. Load material, start jobs, or fine-tune cut parameters, all from one sleek, easy-to-use interface. With the GIDEON EF SERIES, you’re always in control of your workflow.
Unmatched Reliability for Continuous Production
Stay ahead with a machine designed to keep you cutting, not waiting. The GIDEON EF Series combines smart technology with robust engineering to minimize downtime and maximize your shop’s output.
- Smart Collision Prevention – Run jobs with confidence—even unmanned. Our intelligent system detects and avoids obstacles while ensuring safe, rapid positioning.
- Precision Fiber Cutting, Every Time – Advanced Fiber Technology guarantees consistent quality—even on thicker materials—when paired with the proper power source.
- Real-Time System Monitoring – With Condition Guide, you’ll always know the health of your machine, reducing surprises and costly disruptions.
- Automated Edge Detection – Perfect alignment. Accurate sheet placement. More cutting, less stopping—so your workflow stays smooth.
What Metals Can be Laser Cut?
We profile an extensive range of metal and non-metallic materials. With four different flatbed cutting methods under one roof, we can cut materials at depths between 0.1mm and 270mm. If a particular material is not in our exhaustive inventory, we can typically source it within 24-48 hours.
| GIDEON | 1510EF | 3015EF |
|---|---|---|
| CUTTING AREA | 3X4 ft (1000mm X 1500mm) | 5X10 ft (3000mm X 1500mm) |
| CUTTING POWER OPTIONS | 1KW - 6KW | 1KW - 6KW |
| MAX POSITIONING SPEED | 120 m/min | 120 m/min |
| ACCELERATION SPEED | 11.76 m/s² | 11.76 m/s² |
| MAXIMUM WORK PIECE WEIGHT | 1000lbs | 1000lbs |
| POSITION ACCURACY | 0.05mm | 0.05mm |
| REPEATABILITY | 0.03mm | 0.03mm |